GKTECH 350Z/370Z Hydraulic Handbrake Setup

GKtech


$895.00




Nobody likes wasting time setting up a hydraulic handbrake kit!

If you want to avoid wasting time shopping around for all the individual parts, getting custom brake lines made up or running generic parts that may or may not work then we suggest having a look at GKTech's complete hydraulic handbrake kit.
The GKTECH 350z/370z dual caliper brackets feature CNC machined 6061-T6 aluminium and allow the use of either Brembo or non-Brembo calipers. Including Akebono.
The brackets only space the hub out 8mm and do not require any modifications to fit and also allow the use of the drum handbrake.
Includes the hydraulic handbrake lines that go from the Wilwood master cylinder to the rear calipers, everything you need for this kit to work is there, other than the calipers.

Includes a black CNC machined aluminium handle. Silver, blue or pink are available by order.

As the plate spaces the hub out 8mm, meaning the driveshaft is essentially being stretched that 8mm to compensate for the thickness of the plate. This can now be taken up with the use of an axle spacer.
See axle spacers on this page - - https://conceptparts.co.nz/collections/transmission
We have different sized options available as it is also a good opportunity to select a different size axle spacer if you were running a different diff/driveshafts combination or have a very low vehicle.

Vehicle Compatibility: 

- Nissan Z33 350z
- Nissan Z34 370z
- Nissan V35 Skyline
- Nissan V36 Skyline

NOTE: For the axle spacers, GKTech can only confirm fitment on OEM wheel bearings
NOTE 2: ALL Hydraulic brake systems require bleeding after install

FAQ'S
What calipers do I have to use?
Whichever calipers you have now, you need another set of the same calipers. Calipers can not be mixed between models. Ie. you can't run 1 Brembo caliper and 1 OEM Nissan caliper

Will this kit work with aftermarket knuckles?
These brackets are designed to be used with the OEM knuckles. They can NOT be used with aftermarket knuckles.

Will these work with any Wilwood calipers?
No sorry, the bracket has only been designed to be used with the OEM fitment calipers.


Share this product