GKTech 300zx Z32/R chassis Skyline Super lock combo

***300zx Z32/ R chassis Skyline Super Lock Combo ***

SUPER LOCK CHROMOLY LCA's

Available on order only.   Price is indicative only and may change depending on options selected.

BALL SHANK JOINT OPTIONS:
Available to suit either S13/R32 or S14/S15/R33/R34 knuckles. Order the type of ball joint shank based on the knuckle that you are running. If if you're running R33 knuckles on an R32 you need an R33 ball joint shank.

OPTIONAL ITEMS:
Rack spacers - Offset or non offset?
If you are looking for more steering lock then rack spacers are required. Offset rack spacers are required to help avoid steering bind if you have not relocated your steering rack. If you have relocated your steering rack then non offset rack spacers are the way to go. If you aren't looking for more steering lock and you're using your car for grip racing then rack spacers are not required.

INNER TIE RODS:
Depending on whether you run rack spacers or not and also the length that you set the LCA at you will need different length inner tie rods. We have made a 14mm tie inner tie rod that had enough adjustment to suit any configuration with our LCA's/knuckles. Note that these will only work with 14mm tie rod ends.

HIGH MISALIGNMENT OUTER TIE ROD ENDS -12mm or 14mm?
Although not absolutely required running our high misalignment spherical outer tie rod ends will assist in the feel of your steering and they do have bump steer adjustment. Available in both 12mm and 14mm although 14mm are recommended for drifting however note that you will need to be running the corresponding inner tie rod size.